-Synchronized tremolo bridge !! Floating adjustment course !! Edition-
Even if you tune, the tuning will go crazy ...
・
I can't do an arm up ...
・
What is floating in the first place? ? ? etc
Stratocasters are the most orthodox models, but the tremolo effects cannot be demonstrated unless they are well adjusted.
Click here for such a typical stratocaster !!
There are various types of bridges, but A and B can be adjusted in this course.
Click here for guitars equipped with synchronized tremolo bridge >>
2 Stat Treemoro Bridge Click here for guitars
Click here for guitars equipped with Wilkinson Bridge >>
Click here for the guitar equipped with a rock type tremolo bridge >>
Floating is floating !! In other words, floating the bridge from the body is called floating.
To create a floating state, balance the string tension and the spring on the back of the body.
This allows you to arm up (increase the pitch).
Click here for models that can use arms by floating
Spring on the back of the most important body when adjusting the floating♪Use this spring to balance the tension of the strings.
The number of springs is generally three.
Click here for Fender's strat that created three flow.
step 1
A state where the bridge does not float from the body when tuned is called solid state. Tighten the two screws on the back of the body, and even if you tune, the bridge will stick to the body. This state is the starting point.
Step 2
Loosen the screws on the back of the body for about one lap. The spring is loosened and the tuning drops a little. (If it does not go down, the screw will be loosened further.) If you tune it again, the bridge will gradually float.
By using a high -precision tuner, you can do a solid tuning !!
Step 3
Loosen screws> Tuning> Loosen screws> Repeat the tuning, create a bridge about 3 mm, and when the tuning is stable, the floating adjustment will end.
I think that the floating adjustment was mastered with the above !!
If you want to capture the lock -type bridge with the aim of improving the level, click here.
・ Three river shake
This is all the basics. simple is best!!
・ Diagonal hanging on one side
Considering the difference between the tension between the 6th string side and the first string side, only the 6 -string side is applied diagonally to strengthen the spring tension and stabilize the tuning during arming !!
・ Two, C's character
For those who have a thin gauge string. For you who are good at playing technical performances with a soft touch !!
・ Ordinary 5 hangings
By applying 5 springs, one tension is weak. Spring trembles well due to string vibration, making it the most beautiful sound.
・ 5 Han hanging
Five springs are tightened to the limit, and the setting of Han who never floats. Bettered, is best !!
Of course, our shop also conducts health checks and settings for musical instruments !!