第2回改造エフェクターコンテスト1次審査を通過した23作品をご紹介! - TC楽器 - TCGAKKI

 

The 23 unique works that passed the first screening of the 2nd Modified Effectors Contest!

And the web voting for the second round of judging has started!

We have already finished accepting applications. Thank you very much for all of your entries.

The final results will be announced in the October 13 issue of Guitar Magazine, on our website, and in BARKS. Please look forward to it! You can see the details of each entry in the video below.

 

Part.1] The 2nd Modified Effects Pedal Contest - Introducing the works that made it through the first round of judging!

 


Part.2] Introduction of works that passed the 1st round of the 2nd Modified Effectors Contest!

 


The deadline for voting is 9/10(Sun.). Please vote for your favorite works!

Click here to vote!

 

<1> Naoki Tanimura's work "Tap TempoDD-8!!!!Latest version of 2022!!!

BOSS DD-8A tap tempo switch has been added to the BOSS DD-8. Also, in glitch mode, the momentary type has been eliminated and replaced with a latching type.

 

<2> DIY like work "Battery case for ELEHAMO

LEDThis is a battery case exclusively for ELEHAMO that glows with LEDs.

 

<3> Works by JC893 like "Kenta386 Guitar Amplifier

NJM386BDA Centaurus clone board for self-production is built into the housing of a smoky amp using the NJM386BD. The smoky amp alone, smoky amp gain-up, and Centaurus clone on/off are possible, and the built-in speaker can produce sound on its own. The Centaurus Clone can be used as a stand-alone effector by connecting a guitar amp to the output. 

 

<4> Works by JIGOKU NO SHISEI-TAKEI "JIGOKU NO SHISEI-TAKEIOrdinary Bass OverDrive

HAOHAORust RideThe original design was a simple one-knob knob. Originally a simple one-knob(Volume only)I thought that the theme of this project "how to enjoy effects pedals" is to create sounds by tweaking various knobs, so I added many knobs.

 

<5> Jiromaru like this "Jiromaru's workB1FourRevision

Conversion from battery to rechargeable. Rechargeable typeC Battery level can be checked.M-VAVEFoot ofSWcontrol unit is built in, and the footSWfootswitchable presets.

 

<6> RAT believer's work: "RAT believerRachu~!

This is a unit for RAT lovers by RAT fanatics. The mode switch allows you to create a variety of sounds, so you can connect another RAT in the front or rear stage!

 

<7> Tomoki Okuyama's works "milk chocolate crunch

 Milk Chocolate Crunch is an overdrive with a sweet distortion crunch. It is a Marshall blues breaker type overdrive.

 

<8> unaguitar like this "mandarin orange squeezer

30This is an assembled kit which was sold at a music store in Ochanomizu (I forgot the name of the store) about 3 years ago. The contents areDan ArmstrongThe contents of the kit are Dan Armstrong'sOrange SqueezerThe result is a copy of the

 

<9> lenheyvan like this "Golden Pilsner

This work was inspired by the image of a pilsner beer with a tangy, bitter taste and a strong carbonation that goes down the throat. The left two knobs are for pre and the right two knobs are for power. The pre section creates distortion and the power section adds output volume and further distortion.

 

<10> Works by KAZUSHI KIMURA "KAZUSHI KIMURATONE FUZZ MK3 Si Ge MOD

Tone Bender MK3 The circuit of Tone Bender MK3 was modified to use a silicon transistor as the front stage.1(The original was a german transistor.2(The original had two german transistors). The german transistor in the second stage, which has a great influence on the sound, can be removed and replaced. At a glance, it looks like a vacuum tube in a plastic bottle. A self-bias switch for the german transistor, which is not in the original, is also installed.

 

<11> Burnable trash can like this work "Cool Face

Fuzz Face FFM1The silicon transistor of the FFM1 has been replaced with a germanium transistor, and the temperature of the transistor can be digitally controlled. The feature is that the transistor can be cooled as well as heated, allowing you to freely enjoy the differences in sound caused by temperature changes.

 

<12> Robotta like work "DoGTaGFuzz(Dog Tag Fuzz)

Stylish cafes and a variety ofBARI told him that I could play the guitar, and he said, "Would you like to play with me? I'd like to play for you"? If you look closely, you'll see that the amp is clean, and the customer looks at you with anticipation... and that's when this "I'd like to play for you.dogtagfuzzIf you wear this "dogtagfuzz" around your neck, you'll be fine.

 

<13> ATC like this "Gaming Wah for Arcade

VOXWah PedalV847Ain a small arcade controller housing. The theme of this work is a gaming device-like effect pedal.

 

<14> Mashiko like work "V847ASPEED STAR

The volume pedal was converted into an accelerator pedal. When you turn the key, the headlight turns on. The key is removable, so you can feel like a sports car owner.

 

<15> Takumiso's work "takumisoMILIFUZZ

I really wanted to make a fuzz with a missile switch cover. Boys like this kind of thing, don't they?

 

<16> A work of a beginner "MILIFUZZMonster Jr.

We made these shoes out of a desire to do something about children's shoes that had been left in the closet without being worn almost exclusively since they were purchased. The shoes have a shoe-derived grip, so they are slip-resistant.

 

<17> 22incr like thisExcited Muff

Ring modulator and booster built inBig Muffring modulator and booster.

 

<18> Yoshimura's work "MS-50G Candy lime Green

For a very few people, "green is the color of mulch, and green is the color of mulch", so we painted it green. Personally, I think that's a good reason to play with modifications. The circuit inside has not been modified at all.

 

<19> Scitortion like work "BOSSChassisRAT

RATtoBOSSchassis, which was rehoused in a BOSS chassis.

 

<20> Shiroto's Inconvenient Works "iPhonemodified multi-effector

iPhoneIt is a multi-effector made using I want to make a multi-effector! I was driven by the urge to make a multi-effects pedal, so I put all my skills into it, even though I am an amateur.

 

<21> A work of "futsu-no-Tanaka-esqueWahmod

RemovableDCcable andLEDscables and LEDs. Power even very expensive vintage wahs without modifying the wah enclosure,LEDsand LEDs without modifying the wah enclosure.

 

<22> Tom Mura Dondra's work "Teacher! Does the switcher go into the effector?

The story behind the creation of this product is many...(2Here)I wanted to make a switcher, but I didn't have the equipment or money to do so, so I used a camera I had at home as a switcher.

 

<23> booboodonguri like this "booboodonguriSMILE FACE

This is a can-can handmade effect pedal that anyone can make as a fun way to enjoy effect pedals! Despite its appearance, it produces a powerful fuzz sound.

 

The deadline for voting is September 10 (Sun.). Please vote for your favorite!

Click here to vote!

 

Leave a comment

All comments are moderated before publication