Thank you for purchasing the flute at the Daikyu Storage Musical Instrument store.In order to send a happy fruit to life, it is essential to have the right hand in daily life.This is a summary of how to assemble a musical instrument and how to get it on a regular basis.
deficit sectionis the most important point of my mind.Look through your eyes before you're going to use it!
* Wash your hands clean before you touch the instrument.If the washroom is not close, please wipe off the sweat of your palm with a wettish or handkerchief.The sweat is not only a source of the dirt of the bronchie or the wounds of the mecchi, but also the cause of the injury.
● When a musical instrument is derived from a case,Let' s be careful not to grasp the key or the lip plate.
Please note that if you hold your ring with your finger-ring, you will not be aware of it yourself, and you may turn the kiz into the instrument before you realize it.
There is a cork-stopover in the tubes between the head cap and the lip plate.If the position of the rebel is shifted, the balance of the musical interval is broken.
The first line is on the tip of the vacuum cleaner.The cork-plug/anti-archeboard is not located, or it can be easily checked.
the clean-up bar of the cleaning rod is used until the end of the cutting-edge bar corresponds to the projectorI'll plug it in.
The hole in the middle of the rep plate = the rod is right in the middle of the poeway, and the right position is right.If it is either left or right, it should be examined at the instrument store.
It is not recommended that you make adjustments to yourself.If the head cap is loose, then:Just shut it down.in the following order.
The joints of joints, even in small trash, can be connected to the jaws of the joints, and even if they are connected, they can become more innate, or they can become more infined.
Please wipe both the inside and outside of the joint portion with a clean cloth each time before you assemble it.
Assemble the feet pipe and the main pipe.It is kind to look at the core part of the hand between the index finger and the thumb of each hand.Make sure that you do not connect from the diagonal.You can insert the joint in front of the body and connect it straight into it.
The center of the center of the cardiots and main pipes with the scare cups on the same line is relative to the same line.
The main pipe and the head pipe are assembled.The main pipe has the least part of the quai, and the head tube avoids the lip plate.Connect the instrument straight to the front of the body so that it does not connect from the diagonal.
The center of the Utaguchi and the main duct are positioned on the same line, and their position is relative to the same line.
The joints of joints are very delicate, and the joints are bent when connected diagonally.Be very careful when assembling and decomposing, since it can affect the flow of breath and keep the sound and tone quality of good condition.
Disassembling, as in assembly, with caution, as you can in your mind.When decomposing, the instruments are drawn to the front of the body so that they are not drawn in the front of the body, and pull them off a little.
Make sure that you wear a soft clean gauze (a type of garze handkerchief) that is soft and clean, and you put gauze so that the end of the cleaning rod is not out of the tip.Turn the gauze around the cleaning rod in a certain direction so that the cleaning rod is not exposed.
-Wipe the cleaning rod in the same direction as you wrapped the gauze, and then wipe the water in the tube.If it is hard to take the head of the head tube, let the end of the first gauze to the cleaning rod be put out when you wind up the gauze.Once you turn around in the same direction as the roll of the gauze, turn it in the opposite direction slightly, and then turn it in the same direction again to wipe the water off.
The gauze should be replaced periodically.If the gauze is unduchished or torn, replace it with a new one.
Drips in the pipe are still being filled with a pool of sizable drops.In order to prevent any trouble, make sure that the water droplet is wiped out as a result of the practice of cleaning the head.
When the tanpo is blowing for a long time and the water is reached, the cleaning paper will take the water to the tampo.Insert a cleaning paper between the tampo and the tone hole, and then move the patapaata and the quay several times.
At this time, please do not pull the cleaning paper closed while you close the key.In addition to the pain of the tanpo, the cleaning paper is cut into the tampo.
-The cleaning paper is sold with powdered milk, but it is not recommended to be sold.
*The cause of the instigation is to reduce the lifespan of the tampo or to reduce the lifespan of the tanpo, even if the betatsuki is temporarily contained in the betatsuki, and the pollen that remains in the tampo is called to attract
The flute tambo is very delicate-so if you frequently use a cleaning paper, the surface of the tanpo will be damaged and the lifespan will shrink.
Let' s use the cleaning paper only when the tampo is in water.
● Wipe the musical instrument with a soft and clean cross.The Kee and the cup are very delicate.
When wiping the cup part, please wipe it up in the direction of the arrow.
○ If sweating and lipids are hard to get easily, the commercially available sprabottorfor disinfectingEthanol (unhydrating ethanol is bail), and it is good to sprout it lightly, and then wipe it off.
When wiping a musical instrument, you can pull your crosses and fingers, and you can get out of the spring.Suddenly, it's no longer a strange sound, and I think it's possible that the spring is out, so I'll see you at the instrument store.
If you want to pick up a chill or black, you may use a polished agent, but the polishing agent is mixed in the crack section of the kee pipe, and the cause of the injury is caused by the defunct, and the polishing of the polishing agent is added to the tambo.It would be good to be polished in the instrument shop as much as possible.
Please note the following points when you want to make your own clean.
Do not polish directly to the musical instrument, but to grind the soft texture of the fabric.Polar small amount (rice grain)Please keep your brushmen and polish.
・It is especially important to polish the part of the body.The interstices of the quipe can cause a bad one when the polished agent penetrates into a small amount of polished agent.Do not try to avoid the gaps in the gaps, as well as avoid any gaps in the sky.
Do not attach the polished brushes to the tampo.
Finally, make sure to wipe the dried wipes and use a cotton bar for the finer part so that the polishing agent is not left.
● We will put musical instruments in a way that suits the size of the players.
If there is a gas between a musical instrument and a case, it causes the instrument to be easily able to vibrate during the carrying, and the adjustment becomes mad.
-Is the legs tube and the head of the head right?In particular, if the head tube is inverted, it is more likely to be in the wrong case, or it may be in the case of the case, or the wrong way.Please put it in the right case so that lip plates and quays are not to be borne by you.
● Do not close the case by using a musical score or object on top of a musical instrument.You can distort and balance your balance.
Caution of the case, please close the fasteners! Once the case is in the case, let' s get the habit of closing the chuck and the fasteners right now!
● Do not leave the damp gauze in the case in the case.The moisture makes the adjustment easier, and causes the mold to be the cause of the mold.The gauze that you use will be in the pocket of the Kesscava.
When you are away from an instrument, you should wipe the water and put the instrument in the case.Leaving a musical instrument = it is time to play.
Let' s not leave the instrument unattended without leaving a waterless water.
Do not leave the instrument on the chair or on the desk-so that you don't leave the instrument.It's very dangerous.
Don't put any musical instruments on the bike's crabs, car dashboards, or tram shelves.The vibration will cause the adjustment to go mad.Be sure to put it on your shoulders, so that the vibrations will not be conveyed to the instrument as much as possible.
Summer is not hot, but the inside of the car will be hot.Do not leave any instrument inside the car because it causes pain in the tanpo.
How did you like it?
The basic method of foute is more than one method.
Even if you know it, you'll catch your hand in the hand.Isn't that what it is?
It depends on the maintenance of the day, and the adjustment is long.Reconciliation costs are also cheaper.
Have a good hand-in-hand and enjoy the performance.