Unless used instruments are in the store-Electric Guitar-

We the 20th anniversary of the store second-hand instrument shop here in the land of Shinobu Kubo. Thanks to you now, we now have 10,000 points of instruments annually. Such we have a lot of questions that the staff will receive from the customer"Where is a second-hand goods?"is.

As such questions we have a chest and answer."Everything is used goods"This is the best word for us to be the best. If you are not familiar with your new instrument store, you can see any discomfort even if you visit our shop. There may be no new brilliance.

Saba, no savation, dust, dullness, but not newly lose cleanliness, we are polishing, repairing and adjusting instruments every day. Sometimes there is also a dirty guitar that seems to be "filled up!", And while thinking about the day of the next owner, we have bribed the guitar.

Have you ever seen an instrument lined up in a recycling shop? The neck is bent, the string is rusted and dusted and the guitar is wearing dust. "If I bought it at a recycling shop, I can not laugh at a repair fee," I can hear a laughter who can not laugh well, but if a specialty store is a specialty store, it is natural to clean up properly and clean it. We are always working as a specialty store as a specialty store but also the policy of "cleanliness" and "coordinated security" as added value as added value.

The staff of the A second-hand instrument store is not only a wealth of knowledge of a used musical instrument, but also the Maintenance professional instrument. I adjusted with a high technology and a warm heart so that the guitar can be purchased with the best condition.

Then I will introduce you to the store after the guitar arrived in our shop.

It is only about 35 years ago and there are only about 35 years ago, and there is a lot of years.

Especially the stains of the bridge and the finger surface are great.

First, sounds out.
Cleaning and checking the neck status and electrical system before adjustment can be properly treated during degradation.

First, wipe out rough dust and so on.
Household cleaning goods "Quickle wiper". This is very convenient that dust that only wiping up and wiping off!

First polish. Remove roughly rough dirt.

Next, I will remove the string.

Also remove the peg.

While all! · · · Although it looks time and effort, it is better to sew the gap of the peg and finish more efficient than brushing it.

Second polishing. I will polish the head, body from body to fine parts.

The second-hand instrument is equipped with two crosses. The left side is a general "silicon cros". The right side is "hypermicro cross". >> Click here

Do you know the difference in the minor eye? Micro-cross is ultra-ultrafine fiber processed using advanced fiber technology, and fiber itself is easy to wipe off the dirt. I think that it is better to have a micro cross even at home.

Pegs will be polished carefully.

The details are cotton swabs.

It will be picapika so far. It is obvious compared to before polishing.

Next, I will polish the fret. Computer Compounds "Solar Rabbing Compound Ultra" We use pretty eye detail.

Stir well and brush it.

Take a small amount into a small amount in the gap of the fret and put a small amount of fret.

In the case of rose instruments, etc., it uses masking tape that is not entering the conduit of the wood.

Watch! This high speed scratch! Any rusting is picapika!

I also scrape the rubbish of the clearing of the fret.

You can see it as a picapika compared to before polishing.

Pick guards are also disconnected. I do not have any no longer.

Dirt is also entered between the pick guard and the body.

I will polish it so as not to paint painting.

Yes. It became beautiful.

Graybobbin pickup with stamp, check the CTS pot dates. CRL switches · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

The dirt is given to the side of the pickup.

Carefully drop dust so as not to cut the wire.

We also check the electrical system.

Next Bridge.

After all I will be happy. Please note that you do not have no fine original parts!

Polish the screw head.

Take dust and dustiness in the spring.

Six pieces of screws such as screws, frames, and springs are brushed.

Bridge plate is also this shine! About 40 minutes to this time.

Here, rough polishing work is complete. There is almost no darkening of the fingerboard.

Third polishing. Polish with wax on the last finish.

It is strictly prohibited to get painted so as not to paint painting! This is a luster.

After that, it is not a strike.

We will adjust various places such as neck, string height and octave. Next, so as to be easy to use as much as possible to make it easier to play, so that the potential of that instrument is maximized.

The guitar that was polished and adjusted is not permitted to lined up in the store unless you pass the tough check of the guitar responsible for the demon of the THE second-hand instrument.
This time no check is NG. Guitar adjustment is good but polished is another. Strict~!

Rebuild the flame! How about this time!

So far, OK is finally OK! It was fine and I was able to arrange it at the store.

Well, of course, there are things that do not have a hand to here, and there is also an instrument that you do not know where you can handle it from anywhere. But in any condition we face the instrument hardly. While fighting against the limit of repair costs, it will never give up. What kind of instruments are also searched for the best one and adjusted as good as possible and delivered to the customer.
Because we are an important one guitar for customers who possess one hundred products for us. For the first time so far we are afraid with professionals.

>> We look for from one such one bored elex guitar